House and Garden / Garden
Yennora NSW 2161
7 months ago
Woodland Mills is pleased to offer our 8” PTO drive wood chipper with auto hydraulic feed. The WC88 was designed to offer acreage owners an economical
Woodland Mills is pleased to offer our 8” PTO drive wood chipper with auto hydraulic feed. The WC88 was designed to offer acreage owners an economical and well engineered wood chipper. This is a serious wood chipper, with a huge 8” chipping capacity. It was built to be the best valued wood chipper in its class. From the powder coated structure, to its industrial pillow block / flange mount bearings and 4 “V” belt drive system, this wood chipper will exceed your expectations.
•Huge 8.25” diameter infeed roller
•Large 8”x8” in-feed opening
•Forward/Neutral & Reverse infeed roller operation
•Infeed roller speed control valve
•Self contained hydraulic system run off tractor PTO
•Direct drive hydraulic pump (no belt slipping)
•Hinged clamshell flywheel housing design for quick and easy blade changes.
•4 reversible chipper blades
•24” diameter / 1” thick / 120lb solid steel flywheel
•Flywheel speed of over 1,100 RPM for maximum airflow and minimal clogging
•3/8” thick chipper housing
•4 heavy duty cogged B series drive belts with automatic tensioning system
•360 degree rotating discharge chute
•Folding infeed chute for minimum footprint during storage
•½” thick steel chipper base with fully adjustability to accommodate various size tractors
•Commercial quality / standard sized greasable bearings
•Hinged belt guard cover for easy access to the drive system
•Quick attach 3 point hitch system
•Powder coated finish
•Hydraulic hose line protectors
•1 hour assembly time
•PTO shaft included
•Heavy duty 1,050 lbs overall design/weight
•3 year warranty
The WC88 operates on tractors with 30-100 HP. It utilizes a large 23” x 27” infeed hopper opening that tapers down to an 8”x8” opening where the 8.25” diameter hydraulically driven infeed roller grabs the branches and feeds them through the chipper. Branches as small as ¼” diameter and as large as 8” diameter can be fed through the WC88. To chip full 8” diameter logs, tractors with over 60 HP are required.
Hydraulic Infeed System
Branches are pulled into the WC88 via the large 8.25” diameter infeed roller. The roller is hydraulically driven via the chippers self contained hydraulic system. The roller is adjustable in direction and speed making it easy to feed branches of all shapes and sizes. The hydraulic pump is direct drive from the lower shaft, meaning there is no need to worry about wearing or loose drive belts. The roller down pressure may be adjusted via the two large springs ensuring it grabs branches and easily pulls them in, eliminating the need for manual feeding.
The dynamically balanced 24” diameter / 1” thick / 120 lb solid steel flywheel runs on a 2” diameter shaft and is supported by 2 industrial and greasable flanged bearings. It features four CNC machined pockets to hold the reversible blades. The flywheel features four large fan blade paddles that spin at over 1,100 RPM ensuring maximum airflow.
The WC88 chipper utilizes four high quality hardened steel reversible chipper blades. These blades are 90 degrees apart and are offset from one another. They can be flipped to take advantage of having two cutting edges on one blade. Changing blades can be made very quickly thanks to the clamshell flywheel housing design. Simply undo one bolt and the upper flywheel housing rotates open, providing full access to the flywheel and chipper blades.
Folding Infeed Chute
The infeed chute on the WC88 wood chipper has a large 23” x 27” opening, making it easy to feed branches with multiple limbs effortlessly. The infeed chute can also be folded up which decreases the footprint of the chipper during storage or transport.
Shipping Australia wide - Send postcode to receive freight cost